Concrete Block Molds
Hollow Block Mold
Solid Block Mold
Solid Brick Mold
Interlocking Block Mold
Thermal Block Mold
Yes. Technical drawings are often the most efficient way to evaluate a custom mold project. Please include complete dimensions and clearly identify critical surfaces, profiles, cavities, chamfers, rad...
2026/10/12
Yes. Custom molds can be developed for existing production equipment after technical compatibility is confirmed. HAWEN has published mold customization capabilities for equipment from manufacturers su...
2026/10/12
For the initial evaluation, please provide as much of the following information as possible: Block machine brand Machine model Finished block dimensions 2D or 3D block drawing Product photos Physical ...
2026/10/12
Follow a block mould installation checklist for bolted systems, covering matched components, isolation, mounting faces, alignment, tightening and trial production....
2026/10/12
Plan block mould maintenance with cleaning, isolation, wear inspection, clearance measurements, mounting-system checks, suitable lubrication, repair records and storage....
2026/10/12
Troubleshoot block mould demolding, product dimensions, damaged edges, mounting faults and wear by checking tooling, concrete mix, machine settings and pallets....
2026/10/12
HAWEN's published information for applicable mold configurations references approximately 100,000–120,000 cycles. Actual service life depends on aggregates, production intensity, machine condition, m...
2026/11/04
It is a mold designed to produce zigzag-shaped paving blocks whose geometry allows neighboring pavers to interlock. The shape is commonly selected where pavement stability and interlocking behavior ar...
2026/11/04
Wear is influenced by the aggregate, mold geometry, machine settings, and production conditions. Edges and profile areas that repeatedly contact abrasive concrete material require particular attention...
2026/11/04
Yes, where technically suitable. The required profile should be clearly indicated on the block drawing so it can be incorporated into the mold design....
2026/11/04
Yes. Customers can provide a detailed drawing or physical sample together with machine information. HAWEN can evaluate the geometry and develop the corresponding mold....
2026/11/04
HAWEN will evaluate the geometry from a mold-manufacturing and production perspective. Features such as undercuts, very thin sections, deep cavities, complex internal profiles, or movable elements may...
2026/11/04
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
