Curbstone Production Solution

Can the curb face, slope, radius, and chamfer be customized?

The curb face, slope, radius and chamfer can be evaluated for customization where they are suitable for the proposed mould and manufacturing process. These details should be shown clearly on the curbstone drawing. Similar overall dimensions do not necessarily mean two curbstones have the same profile.

Make each profile feature unambiguous

Use a cross-sectional drawing to identify the finished face, the direction of a slope and the positions of the curved or chamfered edges. State which dimensions belong to the main body and which define the edge treatment. If a detail continues along the full length of the curbstone, make that clear; if the end shape differs, provide a corresponding end view.

A photograph or sample is useful for discussing appearance, but it may not distinguish a small radius from a flat bevel or show every hidden surface. Where drawings and samples differ, identify the intended final version before the mould is designed.

Confirm the project requirements together

Send the required profile, overall dimensions and machine information, together with existing mould details where available. Mark any feature that is essential to the project and any part that remains open for technical discussion. The profile and release requirements can then be assessed as one design. Customization should be confirmed for the particular curbstone and line, rather than inferred from a general product illustration.

Related mould information

See Curbstone Molds for the relevant mould range and drawing requirements.

Why does machine compatibility matter for large curbstone molds?

Curbstones are generally larger than standard paving blocks, so the product dimensions, mold arrangement, filling requirements, machine working area, and production parameters must all be considered.

A curbstone design should therefore be evaluated together with the customer's machine rather than treating the mold as a universal component.

Related mould information

See Curbstone Molds for the relevant mould range and drawing requirements.

Can HAWEN make a curbstone mold from a physical sample?

Yes. A physical curbstone sample can be used as a reference where drawings are unavailable.

However, we will also need your block machine information and relevant mold dimensions to ensure that the new mold is suitable for the production equipment.

Related mould information

See Curbstone Molds for the relevant mould range and drawing requirements.