Custom block and paver mold references by machine brand, covering cavity arrays, frame interfaces and wear parts. Send drawings, pallet size and machine details for review.
A HAWEN tooling reference for MASA 9002XL in Qatar: 400 × 200 × 200 mm hollow blocks, 18 pieces per cycle and a 1400 × 1300 mm pallet configuration
A HAWEN hollow block tooling reference for HESS RH1500 in Saudi Arabia. Review block geometry, lower mold cavities and the receiving machine connectio
A HAWEN thermal block tooling reference for HESS HYDROMAT BF80 in the UAE. Review the concrete section, insulation arrangement and receiving machine c
HAWEN custom tooling for a MASA L9.2 in Saudi Arabia on a 1400 × 1300 mm pallet: hollow blocks, wood-textured pavers, smooth-face interlocking pavers
A HAWEN hollow block mold reference for a MASA 9.2 line in the UAE with a 1400 × 1300 mm pallet. Review block drawings, mounting interfaces and assem
Generic MASA 9001 mold page for hollow block and paver tooling review, using verified mold photos without binding mixed galleries to one customer orde
Generic POYATOS Novabloc custom mold page for mixed concrete products, using verified mold photos without claiming one order quantity or fixed dimensi
HAWEN POYATOS tooling reference in Guatemala for 400 × 150 × 200 mm and 390 × 140 × 190 mm hollow blocks. Machine fit is reviewed for each order.
HAWEN grass paver tooling for a POYATOS Novabloc project in Poland: 400 × 200 × 80 mm units and eight pieces per cycle. Review the receiving install
Generic POYATOS Novabloc hollow block mold page focused on cavity layout, upper pressing assembly and machine fit, without borrowing project-specific
HAWEN QUADRA Q10 tooling references in Morocco include hollow block molds and two Hourdis layouts: 518 × 80 × 200 mm with 20 units and 518 × 160 ×
HAWEN TECHMATIK SHP 5000 PRO C tooling reference from Poland: 500 × 200 × 250 mm blocks at 10 per cycle and 500 × 250 × 250 mm at 8, on a 1400 ×
Share the right information with your engineering and purchasing team.
Explore 12 HAWEN mould configurations, product images and drawing review points. Includes a machine and pallet enquiry checklist.
Choose a product or purchasing route, then prepare its review details.
| Selection point | New mould | Replacement mould | Wear-part review |
|---|---|---|---|
| Start with | Product drawing & machine details | Existing mould measurements | Component photos & references |
| Review focus | Product profile and forming method | Mounting, envelope and retained parts | Wear condition and replacement scope |
| Supporting information | Pallet & proposed layout | Current upper/lower assemblies | Part dimensions and identification |
These are review conditions. Order-specific dimensions and compatibility are confirmed against your drawings.
Find a relevant project reference. Confirm the interface before manufacture.
Review mold requirements for a Hess machine. Please provide the machine model, product drawing and mold interface dimensions. Fit and compatibility remain unconfirmed until the details are checked.
Review mold requirements for a Masa machine. Please provide the machine model, product drawing and mold interface dimensions. Fit and compatibility remain unconfirmed until the details are checked.
Review mold requirements for a Poyatos machine. Please provide the machine model, product drawing and mold interface dimensions. Fit and compatibility remain unconfirmed until the details are checked.
Review mold requirements for a Quadra machine. Please provide the machine model, product drawing and mold interface dimensions. Fit and compatibility remain unconfirmed until the details are checked.
Review mold requirements for a Techmatik machine. Please provide the machine model, product drawing and mold interface dimensions. Fit and compatibility remain unconfirmed until the details are checked.
Machine model alone is a starting point. Final fit is reviewed against your product drawing, pallet and tooling interface.
A clear review path before tooling is made.
Product drawing, machine model and pallet.
Cavity layout, forming components and interface.
Drawing, scope, quotation and delivery requirements.
Check against the approved specification.
Protect the tooling and agree the receiving checks.
The product, forming assembly and receiving machine are reviewed together.
Define the unit shape, dimensions and forming details.
Review the pressing faces and clearance with the lower mould.
Check mounting references, pallet and working arrangement.
Discuss the forming parts and replacement requirements.
See the product, machine and review context behind the supplied mould.
Two hollow block moulds were supplied for a Techmatik SHP 5000 PRO C in Poland, covering 500 x 200 x 250 mm and 500 x 250 x 250 mm block layouts.
View project
This Morocco case shows a custom hollow block mould developed for a Quadra Q10 line, covering product review, manufacturing and remote support.
View project
This UAE case covers a hollow block mould developed for a MASA 9.2 production line, with design, manufacturing, inspection and packing based on actual equipment needs.
View projectStructure, machine interface and the points to review before production.
Concrete Mould Fabrication ProcessView the tooling and production context. Confirm the exact mould specification with our team.
Prepare your product and machine information. Let’s review the tooling.
Complex profiles may contain more corners, edges, or detailed forming areas than conventional pavers. These areas should be inspected and cleaned regularly because concrete buildup or wear can affect the finished paver geometry.
We recommend providing: Machine brand and model Paver dimensions 2D or 3D drawing if available Photos or physical sample Required paver thickness Edge/chamfer requirements Existing mold information Any special surface or production requirements The more complete the information, the easier it is to confirm the mold design before manufacturing.
A grass paver mold is designed to produce concrete grid or grass paving blocks with open spaces that can allow grass growth or provide permeable areas. Compared with conventional solid pavers, grass pavers normally contain larger openings and a more complex internal geometry.
Yes. HAWEN can manufacture grass paver molds according to customer drawings, samples, or specified dimensions. The external shape, internal openings, ribs, and overall pattern can be customized according to the required grass paver design.
Manufacturing, quality review and project support.
01A machine brand name is only the beginning of a fit review. Learn which mounting, locating and movement details to discuss when evaluating a mould proposal for an existing line.
Read more
02Build a consistent record of mould condition during wear reviews and changeovers. Link photographs and product observations to the correct tool so replacement decisions have useful evidence.
Read more
03Make a wear-part enquiry more useful with mould references, labelled photographs and production observations. Discuss the repair scope and fitting requirements before ordering components.
Read more
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
