| Product Size | Hourdis A: 518 × 80 × 200 mm; Hourdis B: 518 × 160 × 200 mm. Hollow-block dimensions not specified. |
| Height/Thick. | Hourdis A/B: 200 mm; hollow-block height not specified. |
| Cavities/Cycle | Hourdis A: 20 pieces per mould (518 × 80 × 200 mm); Hourdis B: 12 (518 × 160 × 200 mm). Hollow-block layout unconfirmed. |
| Machine Brand | QUADRA |
| Machine Model | Q10 |
| Pallet Size | 1200 × 1150 mm (Hourdis order only; separate hollow-block order unconfirmed) |
| Product Type | Hollow blocks and Hourdis blocks |
| Certification | CE, ISO |
Separate hollow block and two-size Hourdis references for QUADRA Q10 lines in Morocco.
HAWEN has supplied custom moulds for producers operating QUADRA Q10 machines in Morocco. The projects include hollow block tooling and a repeat order for two Hourdis block moulds. Each project combines the customer's required block profile with the installation dimensions of the receiving machine, so the tooling is reviewed around the actual production requirements.
The hollow block mould uses a matched upper pressing assembly and lower mould box. Cavities and internal cores establish the block outline and openings, while the pressing elements correspond to the concrete sections between them. The project photographs show assembled tooling and unpainted components, providing closer views of the forming surfaces and supporting structure.
The Hourdis order comprised two moulds for a QUADRA Q10 installation with a 1200 x 1150 mm pallet. One layout produces 518 x 80 x 200 mm units, with 20 pieces per mould; the other produces 518 x 160 x 200 mm units, with 12 pieces per mould. These dimensions and quantities describe this particular order and require a separate review for another installation.
Existing mould drawings, mounting measurements and upper assembly connections help define the machine interface. The review should also consider filling access and the relationship between the pressing elements and cavities. For the Hourdis project, the completed moulds were inspected at the HAWEN factory before shipment, with attention to their structure, dimensions and forming cavities.
Send HAWEN your full machine designation, production pallet dimensions and drawings for each required block. Include the intended pieces per mould and photographs of the existing tooling. Identify any changes to the internal openings, wall sections or edges so that the proposed design can be checked against both the product and the machine connections.
Provide a dimensioned drawing showing the overall block size, internal openings, wall thicknesses and any stepped edges or recesses. Cross sections are particularly useful for communicating the core arrangement. For replacement tooling, include photographs of the existing blocks and mold so that the required features can be reviewed together.
Send your product drawing, machine details, production pallet dimensions and required layout for a configuration review.
Explore Custom Molds, or contact HAWEN for a mold quotation. The quotation and approved technical documents confirm the final tooling and supply requirements.
| Parameter | Specification |
|---|---|
| Finished Product Size | Hourdis A: 518 × 80 × 200 mm; Hourdis B: 518 × 160 × 200 mm. Hollow-block dimensions not specified. |
| Block Height / Paver Thickness | Hourdis A/B: 200 mm; hollow-block height not specified. |
| Cavities per Cycle / Layout | Hourdis A: 20 pieces per mould (518 × 80 × 200 mm); Hourdis B: 12 (518 × 160 × 200 mm). Hollow-block layout unconfirmed. |
| Compatible Machine Brand | QUADRA |
| Compatible Machine Model | Q10 |
| Pallet Size | 1200 × 1150 mm (Hourdis order only; separate hollow-block order unconfirmed) |
| Finished Product | Hollow blocks and Hourdis blocks |
| Separate hollow-block reference | QUADRA Q10 hollow-block tooling is a separate reference; Hourdis dimensions, quantities and pallet are not assigned to it. |
Documented project reference for the named machine and order only. For a new mould, provide the approved unit drawing, full machine model, pallet drawing and measured interfaces. Agree the cavity layout, component materials, treatment and inspection requirements in the quotation and technical approval.
Review QUADRA Q10 tooling using your own line details. Check mounting points, upper connections and pallet drawings together, keeping hollow block and Hourdis references distinct as you prepare the enquiry and approve the proposed tool.
Read more →Compare QUADRA Hourdis layouts with each block size clearly identified. State the block section and desired pieces per mould, then review cavity layout and pallet use without applying one order’s figures to a different product.
Read more →Make QUADRA tooling checks easier to interpret by naming the mould, drawing and cavity locations. Agree inspection records before shipment and retain condition views so later wear or replacement enquiries refer to the correct assembly.
Read more →Evaluate the connection between mould machining and assembly, with practical questions about drawing revisions, mating components and the manufacturing records relevant to your order.
Read moreConsider replaceable forming components during mould selection. Review part identification, access and matching requirements before assuming that a whole tool can be refurbished.
Read more
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
Product Size
Cavities/Cycle
Machine Brand
Machine Model
Certification
2026-10-25
The Hourdi mould configuration should match the Quadra machine's forming area and pallet specifications. Hawen's technical review helps clarify the required dimensions and cavity arrangement for the intended concrete products. It's quality and long life mould
HAWEN technical summary 2026-10-20
HAWEN QUADRA Q10 tooling references in Morocco include hollow block molds and two Hourdis layouts: 518 × 80 × 200 mm with 20 units and 518 × 160 × 200 mm with 12 units.