Paver Block Production Solution

Define the paver specification

• Confirm length, width, thickness and the complete connecting profile.
• Identify chamfers, spacers, surface features and the drawing for each required pattern.
• State the preferred pieces per cycle and provide the machine model and pallet size.

Develop the mould for the installation

Cavity spacing and the structure between products must suit the available forming area. Review the lower box, pressing faces and upper assembly as a matched configuration. For an existing line, mounting points, head connections and operating height should be confirmed from current drawings and measurements. Identify any changes in product thickness, geometry or output before the layout is agreed.

Agree inspection and production review

Check the cavity geometry, pressing faces, frame connections and assembly alignment against approved drawings. For a recurring product defect, record the affected cavity and provide close photographs. Define any trial scope and review dimensions, edge formation and release with the mix and machine settings. Confirm protective packing, identification and inspection records as part of the delivery requirements.

Request a paver mould proposal

• Send HAWEN your paver drawings, machine model, pallet dimensions and target output. Include existing interface drawings, mould photographs and requested product changes. These references establish the proposed configuration, technical checks and supply scope before manufacture.

Define the surface and product brief

• Specify paver length, width, thickness, edge treatment and any side features.
• Identify texture, curvature and relief using a physical sample or clear reference pattern.

List each required size separately and state the intended cavity count.

Project reference from Uganda

HAWEN supplied a custom stoneface paver mould in July 2025 for a customer's Italian block machine in Uganda. The request combined a curved surface with a stone texture. The case covers drawing preparation, customer review, manufacture and shipment, with views of the assembly and protective packing. The published case does not identify the exact machine brand or model.

Related moulds and technical review

Explore Paver Block Molds for the available documented tooling examples.

Contact HAWEN with the approved product drawing and machine information for a review of the proposed mould configuration.