| Mould Model | IB-200 / IB-225 / Custom Interlocking Block Mould |
| Product Size | Typical: 200 × 100 × 60 mm; 200 × 100 × 80 mm; 225 × 112.5 × 60 mm (Custom sizes and interlocking designs available) |
| Thickness | 40–120 mm (design-dependent reference) |
| Material / HRC | Wear-resistant alloy steel; precision-machined and heat-treated, HRC58–62 (reference) |
| Cavities/Cycle | Custom to paver size, mould layout and machine specifications |
| Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Life (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Surface Finish | Face texture, chamfers and spacers to the approved paving drawing |
| Certification | CE, ISO |
Connecting paving outlines and coordinated modules based on your laying pattern.
Interlocking paver molds reproduce paving units with connecting outlines, locating features or a coordinated module. Discuss your required unit geometry and machine configuration with HAWEN to develop a mold proposal around the approved drawing. The specification can be reviewed for a new product or for replacement tooling in an existing production line.
Measure the trial units, then assemble a representative section of paving with the intended spacers and joints. Inspect boundaries between different sizes and verify that the pattern repeats without accumulated mismatch. Record both acceptable appearance and dimensional results.
Final dimensions, cavity count, machine compatibility, materials, inspection criteria and delivery scope are confirmed in the quotation and approved technical documents. Provide the exact machine model and current interface details when requesting replacement tooling. Finished-product performance must be assessed for the agreed materials, process and intended use.
Send HAWEN your drawings, reference samples or photos, machine details and delivery destination to request a configuration review and quotation.
Provide the paver length, width and thickness, together with any chamfers, spacers or connecting profiles. Identify each required design separately when planning a product range. The preferred number of units per cycle should be reviewed alongside the pallet dimensions and available forming area before the cavity layout is agreed.
A useful enquiry includes the exact machine model, pallet size and existing mould interface drawings. Mounting points, upper assembly connections and operating dimensions need to be considered together. Photographs can clarify the current arrangement, while measured drawings establish the dimensions needed for a replacement or revised tooling proposal.
Send your product drawing, machine details, production pallet dimensions and required layout for a configuration review.
Explore Paver Block Molds, or contact HAWEN for a mold quotation. The quotation and approved technical documents confirm the final tooling and supply requirements.
| Parameter | Specification |
|---|---|
| Mould Model | IB-200 / IB-225 / Custom Interlocking Block Mould |
| Finished Product Size | Typical: 200 × 100 × 60 mm; 200 × 100 × 80 mm; 225 × 112.5 × 60 mm (Custom sizes and interlocking designs available) |
| Paver Thickness Range | 40–120 mm (design-dependent reference) |
| Mould Material / Hardness | Wear-resistant alloy steel; precision-machined and heat-treated, HRC58–62 (reference) |
| Cavities per Cycle / Layout | Custom to paver size, mould layout and machine specifications |
| Compatible Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Compatible Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Mould Service Life Reference (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Surface Texture / Finish | Face texture, chamfers and spacers to the approved paving drawing |
Reference specifications are subject to approved product and installation drawings. Match the brand and exact machine model as one reviewed configuration; QT references do not establish compatibility with every listed brand. Confirm the components receiving the stated alloy-steel treatment and the hardness measurement locations. The 80,000–120,000-cycle figure is an approximate mould service-life reference affected by machine condition, raw materials and paver design; it is not a forming-time figure or a guaranteed life.
Interlocking outlines are machined to the approved product geometry. Consistent profiles help neighboring units fit together with the intended joint arrangement.
Paver thickness, chamfers, and connecting profiles can be developed according to your specifications. The final design is checked against machine capabilities and production requirements.
The specified paver mold clearance is 0.2–0.25 mm per side between the mold box and tamper head. Precision matching maintains the intended relationship between these forming components.
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
Mould Model
Product Size
Material / HRC
Cavities/Cycle
Machine Brand
Certification
HAWEN technical summary 2026-10-20
HAWEN interlocking paver molds for connecting outlines and coordinated paving modules. Review unit drawings, spacers, pack arrangements and machine configuration.