MASA 9.2 Hollow Block Mould Project in the UAE

This UAE project supplied a hollow block mould developed around an existing MASA 9.2 production line.

Replacing or Adding a Mould to an Existing Machine

A concrete product manufacturer in the United Arab Emirates required a hollow block mould compatible with its existing MASA 9.2 block-making machine.

When a mould is purchased for an installed production line, the block drawing is only one part of the required information. The supplier must also understand the machine configuration, mould installation conditions and the relationship between the mould box and tamper head. A mould that produces the correct block shape still needs to match the equipment accurately before it can enter production.

For this project, HAWEN discussed the required block sizes, mould configuration and machine-related details with the customer before confirming the production plan.

Confirming Compatibility Before Manufacturing

The technical team used the confirmed information to prepare the mould design for the MASA 9.2. Attention was given to the dimensions and connection details that affect installation and operation on the customer’s machine.

This confirmation stage is especially important when supplying a mould for equipment manufactured by another brand. Machine model names alone may not provide all the information required for production, as equipment configurations and existing mould interfaces can vary. Reviewing the customer’s actual technical data helps reduce the risk of installation problems after delivery.

Once the design details were approved, manufacturing began according to the confirmed specifications. Machining accuracy and the principal mould dimensions were controlled during production to maintain the required compatibility with the MASA equipment.

Final Inspection and Shipment

After manufacturing was completed, the mould was inspected before packing. The inspection focused on confirming that the finished mould corresponded with the approved design and customer requirements.

The completed hollow block mould was then prepared for shipment to the customer in the UAE.

Although this was a single-mould project, its success depended on the same disciplines required for a larger order: accurate information, clear drawing confirmation and controlled manufacturing. For concrete producers sourcing a replacement or additional mould, providing complete machine and product details at the beginning of the project can significantly improve the efficiency of technical communication.

This case demonstrates HAWEN’s ability to develop a customized hollow block mould around an existing MASA 9.2 production line, giving the customer a solution based on its actual equipment rather than a general mould specification.

Review more Masa mould cases or contact HAWEN with your block drawing, machine model and pallet size.