Quadra Q10 Hollow Block Mould Project in Morocco

This Morocco project focused on a customized hollow block mould matched to a Quadra Q10 production line and confirmed block requirements.

Supporting an Existing Block Production Line

A concrete block manufacturer in Morocco required a customized mould for its Quadra Q10 block-making machine. As production requirements increased, the customer sought a supplier capable of providing tooling that matched the existing equipment and maintained accurate block dimensions under repeated use.

The customer’s priorities included wear resistance, consistent forming geometry and compatibility with the installed machine. HAWEN worked with the customer to define these requirements before developing the mould.

Confirming the Design Before Manufacturing

Technical discussions covered the required block dimensions, product shape and production expectations. This information provided the starting point for the mould design, together with the requirements of the customer’s Quadra Q10.

HAWEN prepared CAD drawings for review before manufacturing. The design connected the required block geometry with the mould dimensions and equipment interface, allowing the customer and engineering team to confirm the proposed tooling before production began.

For this project, compatibility involved both the forming components and the mould’s fit within the existing machine. Confirming these details at the drawing stage established a common reference for manufacturing and inspection.

Manufacturing for Repeated Production

The mould was manufactured from abrasion-resistant steel, with attention to the forming surfaces and structural details. Material selection addressed the customer’s requirement for tooling suitable for repeated contact with concrete during production.

Dimensional checks formed part of the inspection process. These checks assessed the completed mould against the confirmed design before dispatch, providing a final opportunity to review the manufactured components.

The mould was then prepared for international delivery to Morocco.

Installation Support after Delivery

Following delivery, HAWEN provided remote technical guidance to assist the customer with installation on the Quadra Q10. This continued the technical support beyond manufacturing and shipment, helping the customer integrate the supplied mould into its existing equipment.

The project brought together product specification review, customized design, manufacturing, inspection and installation support. Each stage addressed the same practical requirement: supplying a concrete block mould suited to the customer’s production line.

For the Moroccan manufacturer, the completed supply provided customized tooling for its existing Quadra Q10. For HAWEN, the project demonstrated a coordinated approach to mould supply, beginning with the customer’s block requirements and continuing through delivery and installation assistance.

Review more Quadra mould cases or contact HAWEN with your block drawing, machine model and pallet size.