Concrete Block Molds
Hollow Block Mold
Solid Block Mold
Solid Brick Mold
Interlocking Block Mold
Thermal Block Mold
Yes, depending on the customer's production line and machine configuration. If your machine uses a face-mix system for producing colored or decorative top layers, please provide the machine model and ...
2026/10/12
Yes. If you already have a paver in production, you can provide the finished paver drawing or sample together with your existing mold and machine information. HAWEN can evaluate the dimensions, interl...
2026/10/12
Rectangular paver molds can be customized according to the required length, width, thickness, and edge profile. The cavity arrangement is designed together with the available working area of the block...
2026/10/12
Yes. The number and layout of cavities depend on paver dimensions and the machine's production area. The arrangement can be optimized after reviewing the machine specifications....
2026/10/12
Yes. The mold can be developed according to the required paver geometry. If a particular laying pattern requires special dimensional relationships or edge details, these should be included in the cust...
2026/10/12
Rectangular pavers are often installed in repeating patterns. Consistent dimensions help maintain straight joints, uniform spacing, and predictable laying patterns across larger paved areas....
2026/10/12
Special edge features can be evaluated and incorporated where technically suitable. Customers should provide a detailed drawing or sample showing the required geometry....
2026/10/12
Wear can gradually change cavity dimensions, edges, and clearances. This can influence paver dimensions and appearance, so regular inspection and maintenance of wear areas are important....
2026/10/12
Yes. A drawing is preferred, but a physical paver sample, detailed dimensions, photos, and machine information can also be used for technical evaluation....
2026/10/12
HAWEN produces customized molds for different block machine brands, including applicable Hess, Masa, Zenith, Tiger, and other machine configurations. The exact machine model and mold interface must be...
2026/10/12
HAWEN can manufacture square paver molds according to customer-specified length, width, thickness, edge profile, and machine configuration. Custom dimensions can be developed for different paving appl...
2026/10/12
Yes. The target paver thickness is considered during mold design. The final solution must also match the operating characteristics and production settings of the customer's block machine....
2026/10/12
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
