Concrete Block Molds
Hollow Block Mold
Solid Block Mold
Solid Brick Mold
Interlocking Block Mold
Thermal Block Mold
A custom mold has to satisfy two requirements at the same time: it must reproduce the required concrete product geometry, and it must operate correctly on the customer's production equipment. Providin...
2026/11/04
For applicable HAWEN mold components, surface hardness can reach approximately HRC 58–62 after heat treatment. The exact material and treatment process depend on the mold structure and production req...
2026/11/04
The male/female or corresponding interlocking sections must fit consistently during installation. Excessive dimensional variation can affect alignment, installation efficiency, and the appearance of t...
2026/11/04
The main difference is the internal mold structure. Hollow block molds use core components to create cavities inside the block, while solid block molds produce blocks without large internal voids. Thi...
2026/11/04
Yes. If an original technical drawing is available, it can be used as an important reference. If not, customers can provide existing mold dimensions, detailed photos, machine information, and finished...
2026/11/04
Complex or thin sections can increase the requirements for filling, compaction, core strength, wear control, and demolding. For this reason, HAWEN evaluates the proposed block geometry before finalizi...
2026/11/04
Yes, subject to technical confirmation. The machine model, working area, connection dimensions, existing mold information, and required block specifications should be checked before production....
2026/11/04
HAWEN can manufacture molds for different concrete curbstone and kerbstone profiles according to customer drawings, samples, dimensions, and machine specifications. Different lengths, heights, widths,...
2026/11/04
Yes. These geometric features can be incorporated into the mold design according to the required curbstone profile and manufacturing feasibility. A cross-sectional drawing is particularly useful for c...
2026/11/04
Edge damage can be associated with concrete consistency, product geometry, compaction, machine settings, demolding conditions, mold wear, or other production factors. If a customer experiences repeate...
2026/11/04
Complex profiles may contain more corners, edges, or detailed forming areas than conventional pavers. These areas should be inspected and cleaned regularly because concrete buildup or wear can affect ...
2026/10/12
We recommend providing: Machine brand and model Paver dimensions 2D or 3D drawing if available Photos or physical sample Required paver thickness Edge/chamfer requirements Existing mold information An...
2026/10/12
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
