Can you reproduce an existing zigzag paver?

Can you reproduce an existing zigzag paver?

An existing zigzag paver can be evaluated for reproduction from a detailed drawing or physical sample, together with the receiving machine information. HAWEN can review the geometry and the corresponding mould requirements. The starting information should make clear whether the aim is an unchanged replacement or a revised paving unit.

Capture the complete product geometry

Provide the plan outline, product thickness and any chamfer, spacer or special edge detail shown on the intended design. If a sample is worn or damaged, mark the affected areas so their condition is not mistaken for the original shape. Clear photographs of the top, underside and sides can help explain the unit, but they do not define every required dimension.

Where the paver must match an existing pattern, include the associated unit or arrangement information. This keeps the relationship between neighboring shapes part of the review. Any requested dimensional or surface change should be separated from the measurements taken from the sample.

Connect reproduction to the production line

Send the machine make and full model, pallet dimensions and relevant existing mould or pressing-tool drawings. Note which measurements are confirmed and which still require technical checking. The proposed mould must reproduce the agreed paver geometry and match the equipment interface; neither requirement should be inferred solely from a sample or a machine brand name.

Related mould information

See Zigzag Interlock Paver Mold for the relevant mould range and drawing requirements.