| Mould Model | IB-200 / IB-225 / Custom Interlocking Block Mould |
| Product Size | Typical: 200 × 100 × 60 mm; 200 × 100 × 80 mm; 225 × 112.5 × 60 mm (Custom sizes and interlocking designs available) |
| Thickness | 40–120 mm (design-dependent reference) |
| Material / HRC | Wear-resistant alloy steel; precision-machined and heat-treated, HRC58–62 (reference) |
| Cavities/Cycle | Custom to paver size, mould layout and machine specifications |
| Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Life (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Surface Finish | Specified face texture, chamfers and spacers to the approved drawing |
| Certification | CE, ISO |
Prepare the paving geometry and measured installation references for a custom tooling enquiry.
Custom interlocking paver tooling brings together the required paving design and the receiving production equipment. A useful brief includes more than a photograph of a preferred outline. This page focuses on the drawings, layout information and existing machine references that give a new or replacement mold proposal a defined starting point.
Provide the actual length, width and thickness together with the full outline. Identify chamfers, spacers, connecting profiles and the intended face texture. Draw companion units separately where the laying pattern requires different sizes or shapes. State the quantity of each unit needed in a production or sales pack before the cavity arrangement is reviewed.
Include the exact machine model, production pallet size and existing mold interface drawings. Measured mounting points, upper assembly connections and working dimensions establish the receiving fit. Photographs can clarify the current arrangement and retained features, while the approved measurements remain the basis for assessing a replacement or revised tooling proposal.
Agree the cavity layout, inspection criteria and delivery scope through the quotation and technical documents. Trial units should be measured and laid with the intended joints to check profile matching and repeat dimensions. For a revised product, describe the changes to the current mold and retain the accepted samples so geometry and appearance can be discussed together.
Send your product drawing, machine details, production pallet dimensions and required layout for a configuration review.
Explore Paver Block Molds, or contact HAWEN for a mold quotation. The quotation and approved technical documents confirm the final tooling and supply requirements.
| Parameter | Specification |
|---|---|
| Mould Model | IB-200 / IB-225 / Custom Interlocking Block Mould |
| Finished Product Size | Typical: 200 × 100 × 60 mm; 200 × 100 × 80 mm; 225 × 112.5 × 60 mm (Custom sizes and interlocking designs available) |
| Paver Thickness Range | 40–120 mm (design-dependent reference) |
| Mould Material / Hardness | Wear-resistant alloy steel; precision-machined and heat-treated, HRC58–62 (reference) |
| Cavities per Cycle / Layout | Custom to paver size, mould layout and machine specifications |
| Compatible Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Compatible Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Mould Service Life Reference (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Surface Texture / Finish | Specified face texture, chamfers and spacers to the approved drawing |
Reference specifications are subject to approved product and installation drawings. Match the brand and exact machine model as one reviewed configuration; QT references do not establish compatibility with every listed brand. Confirm the components receiving the stated alloy-steel treatment and the hardness measurement locations. The 80,000–120,000-cycle figure is an approximate mould service-life reference affected by machine condition, raw materials and paver design; it is not a forming-time figure or a guaranteed life.
Interlocking outlines are machined to the approved product geometry. Consistent profiles help neighboring units fit together with the intended joint arrangement.
Paver thickness, chamfers, and connecting profiles can be developed according to your specifications. The final design is checked against machine capabilities and production requirements.
The specified paver mold clearance is 0.2–0.25 mm per side between the mold box and tamper head. Precision matching maintains the intended relationship between these forming components.
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
Mould Model
Product Size
Material / HRC
Cavities/Cycle
Machine Brand
Certification
HAWEN technical summary 2026-10-20
Prepare a custom interlocking paver mold enquiry with HAWEN using unit drawings, machine data and mounting measurements. Review forming details before manufacture.