| Mould Model | HB-400 / HB-390 / Custom Hollow Block Mould |
| Block Size | Typical: 400 × 200 × 200 mm; 400 × 200 × 150 mm; 400 × 200 × 100 mm (Custom sizes available) |
| Block Height | 100–300 mm (design-dependent reference) |
| Material / HRC | Wear-resistant alloy steel; heat-treated, HRC58–62 (reference) |
| Cavities/Cycle | 4 / 6 / 8 / 10 / 12 / 15 / 18; custom configuration (reference) |
| Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Life (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Mounting | Reviewed against machine mounting drawings |
| Certification | CE, ISO |
Define the concrete sections between the outside block profile and internal openings.
A hollow block mold controls both the outside of the masonry unit and its internal openings. The concrete sections between those surfaces are part of the product specification. A useful enquiry therefore includes a dimensioned block section, rather than relying only on an overall length, width and height or a nominal size name.
Identify face-shell and web dimensions, the number and arrangement of openings, and any special end profiles. Include grooves or other details that must be formed. A replacement enquiry can use photographs of the existing blocks and tooling to explain retained features, while the approved drawing establishes the actual dimensions.
The mold box, internal cores and tamper head work together to form the external shape and hollow sections. Their layout should be reviewed against the production pallet and available machine forming area. Provide the full machine model and measured mounting references so the required block geometry and installation requirements can be checked together.
Inspect outside dimensions, core positions, web continuity and edges during the agreed trial. Compare units from different cavities and retain the mix condition and machine settings with the inspection record. Final acceptance is based on the approved drawing and agreed inspection criteria; finished-product performance depends on the specified materials, process and intended use.
Send your product drawing, machine details, production pallet dimensions and required layout for a configuration review.
Explore Concrete Block Molds, or contact HAWEN for a mold quotation. The quotation and approved technical documents confirm the final tooling and supply requirements.
| Parameter | Specification |
|---|---|
| Mould Model | HB-400 / HB-390 / Custom Hollow Block Mould |
| Finished Block Size | Typical: 400 × 200 × 200 mm; 400 × 200 × 150 mm; 400 × 200 × 100 mm (Custom sizes available) |
| Block Height Range | 100–300 mm (design-dependent reference) |
| Mould Material / Hardness | Wear-resistant alloy steel; heat-treated, HRC58–62 (reference) |
| Cavities per Cycle / Layout | 4 / 6 / 8 / 10 / 12 / 15 / 18; custom configuration (reference) |
| Compatible Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Compatible Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Mould Service Life Reference (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Frame Interface Type | Reviewed against machine mounting drawings |
Reference specifications are subject to approved product and installation drawings. Match the brand and exact machine model as one reviewed configuration; QT references do not establish compatibility with every listed brand. Confirm the components receiving the stated alloy-steel treatment and the hardness measurement locations. The 80,000–120,000-cycle figure is an approximate mould service-life reference affected by machine condition, raw materials and block design; it is not a forming-time figure or a guaranteed life.
Block dimensions, core shapes, and hole arrangements are customized to your drawings or samples. Wall thickness and release geometry are reviewed together to match your product requirements and production equipment.
Swedish HARDOX steel is used for the hollow block mold beams to provide wear resistance in these components. A frame reinforced by welded stiffeners helps maintain structural stability and component alignment during repeated production.
Critical wear components undergo carbonitriding and quenching, achieving a surface hardness of HRC 59–61 with an effective hardened layer of approximately 1.5 mm. This treatment helps resist abrasive wear and preserve the forming geometry.
Evaluate the connection between mould machining and assembly, with practical questions about drawing revisions, mating components and the manufacturing records relevant to your order.
Read moreA machine brand name is only the beginning of a fit review. Learn which mounting, locating and movement details to discuss when evaluating a mould proposal for an existing line.
Read more
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
Mould Model
Block Size
Material / HRC
Cavities/Cycle
Mounting
Certification
HAWEN technical summary 2026-10-20
Review hollow block mold geometry with HAWEN using face-shell, web and opening drawings. Confirm inspection points and machine fit for the specified masonry unit.