| Mould Model | SB-400 / SB-390 / Custom Solid Block Mould |
| Block Size | Typical: 400 × 200 × 200 mm; 400 × 200 × 150 mm; 400 × 200 × 100 mm (Custom sizes available) |
| Block Height | 50–200 mm (design-dependent reference) |
| Material / HRC | Wear-resistant alloy steel; heat-treated, HRC58–62 (reference) |
| Cavities/Cycle | 4 / 6 / 8 / 10 / 12 / 15 / 18; custom configuration (reference) |
| Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Life (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Mounting | Reviewed against machine mounting drawings |
| Certification | CE, ISO |
Solid masonry profiles and matched tamper geometry based on your block drawing.
Solid concrete blocks use a compact masonry profile without the large open cores found in hollow units. Discuss your required unit geometry and machine configuration with HAWEN to develop a mold proposal around the approved drawing. The specification can be reviewed for a new product or for replacement tooling in an existing production line.
Check dimensions and squareness on units taken from several cavities. Examine corners, vertical faces and the underside for damage or inconsistent forming. If the product has a decorative face, agree its reference sample in advance.
Final dimensions, cavity count, machine compatibility, materials, inspection criteria and delivery scope are confirmed in the quotation and approved technical documents. Provide the exact machine model and current interface details when requesting replacement tooling. Finished-product performance must be assessed for the agreed materials, process and intended use.
Send HAWEN your drawings, reference samples or photos, machine details and delivery destination to request a configuration review and quotation.
The number and arrangement of cavities should be reviewed against the machine forming area, pallet size and product dimensions. The layout needs space for the mould structure as well as consistent material distribution. Output per cycle is a project specification, not a fixed value shared by every solid block mould.
Send your product drawing, machine details, production pallet dimensions and required layout for a configuration review.
Explore Concrete Block Molds, or contact HAWEN for a mold quotation. The quotation and approved technical documents confirm the final tooling and supply requirements.
| Parameter | Specification |
|---|---|
| Mould Model | SB-400 / SB-390 / Custom Solid Block Mould |
| Finished Block Size | Typical: 400 × 200 × 200 mm; 400 × 200 × 150 mm; 400 × 200 × 100 mm (Custom sizes available) |
| Block Height Range | 50–200 mm (design-dependent reference) |
| Mould Material / Hardness | Wear-resistant alloy steel; heat-treated, HRC58–62 (reference) |
| Cavities per Cycle / Layout | 4 / 6 / 8 / 10 / 12 / 15 / 18; custom configuration (reference) |
| Compatible Machine Brand | HAWEN / HESS / MASA / ZENITH / QUADRA / other brands (subject to fit review) |
| Compatible Machine Model | QT4-15 / QT6-15 / QT8-15 / QT10-15 / QT12-15 / QT15 / QT18 / custom models (reference; fit review) |
| Pallet Size | Custom to the receiving block-making machine |
| Mould Service Life Reference (cycles) | Approx. 80,000–120,000 cycles (reference; operating conditions apply) |
| Frame Interface Type | Reviewed against machine mounting drawings |
Reference specifications are subject to approved product and installation drawings. Match the brand and exact machine model as one reviewed configuration; QT references do not establish compatibility with every listed brand. Confirm the components receiving the stated alloy-steel treatment and the hardness measurement locations. The 80,000–120,000-cycle figure is an approximate mould service-life reference affected by machine condition, raw materials and block design; it is not a forming-time figure or a guaranteed life.
Solid block molds are developed around your required length, width, height, and shape. This provides tooling for market-specific block formats on compatible production equipment.
The number and arrangement of cavities are determined from the block dimensions and usable machine area. Each layout is evaluated against the actual production configuration.
Accurate machining defines the cavity surfaces and matching tamper components. Controlled component dimensions support consistent block shape during properly adjusted production.
Make a wear-part enquiry more useful with mould references, labelled photographs and production observations. Discuss the repair scope and fitting requirements before ordering components.
Read moreOrganise machine and pallet information for a mould fit discussion. Label measurements, describe existing tooling and identify missing interface details before a proposal is confirmed.
Read more
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
Mould Model
Block Size
Material / HRC
Cavities/Cycle
Mounting
Certification
HAWEN technical summary 2026-10-20
HAWEN solid block molds for approved masonry profiles, face details and machine layouts. Review product dimensions, pallet size and trial acceptance criteria.