Concrete Block Molds
Hollow Block Mold
Solid Block Mold
Solid Brick Mold
Interlocking Block Mold
Thermal Block Mold
For applicable HAWEN mold configurations, the referenced service life is approximately 100,000–120,000 production cycles under appropriate operating and maintenance conditions. Actual service life de...
2026/10/12
Mould-to-tamper clearances must be confirmed for the applicable mould design and the measurement positions shown on its approved drawings. Accurate machining and matched components help maintain the s...
2026/10/12
Please provide the machine brand and model, finished block dimensions, block drawing or photos, and existing mold drawings or dimensions if available. A physical block sample can also be useful when d...
2026/10/12
Interlocking blocks contain matching geometric features that connect adjacent blocks. As a result, the accuracy and consistency of the interlocking profiles are particularly important in mold design a...
2026/10/12
Yes. Interlocking block molds can be developed from customer drawings, samples, or existing block designs. The connecting profiles, block dimensions, cavities, and other geometric features can be cust...
2026/10/12
A physical block sample can be used as an important design reference. HAWEN will also need the block machine information and relevant mold dimensions to evaluate manufacturability and machine compatib...
2026/10/12
Possible causes include block geometry, raw-material moisture, worn mold components, unsuitable machine settings, or the design of the release surfaces. For complex interlocking blocks, mold geometry ...
2026/10/12
For applicable components, wear-resistant materials, precision machining, and suitable heat-treatment processes are used. Correct machine adjustment and regular mold maintenance are also important bec...
2026/10/12
Yes. The mold can be designed after confirming the machine brand, model, working area, mounting requirements, existing mold information, and target block design....
2026/10/12
HAWEN can manufacture solid concrete block molds in different sizes, cavity arrangements, and configurations. The mold is designed according to the required block dimensions and the technical specific...
2026/10/12
The cavity arrangement can be designed according to the block dimensions and available working area of the machine. The final number of blocks per cycle must therefore be determined after reviewing bo...
2026/10/12
Depending on the mold configuration, HAWEN uses suitable manganese steel materials together with machining and heat-treatment processes such as carburizing, nitriding, and quenching for applicable com...
2026/10/12
Tel: +8618359454595
Email: sale@hwmachines.com
MP/WhatsApp: +8618359454595
Manufacturer Address:Nanan, Quanzhou City, Fujian Province, China
